Crow Runner Link Bedienungsanleitung PDF herunterladen (Seite 4)

Introduction

The RUNNER LINK Gateway is a small external hardware addition to Crow’s

Runner Control Panel Series. It is connected to the Alarm System using a

special cable supplied and also connected to the Internet or LAN using the

standard

RJ-45 connector.

Today the majority of businesses and domestic households that have an

intruder alarm installed already have an open connection to the Internet. The

RUNNER LINK Gateway connects itself to the LAN therefore establishing a

very low cost communication link with any Monitoring Service of their choice.

When connected to a central monitoring station over the Internet the alarm

system has the ability to ensure professional protection 24/7. This is because

a watchdog timer ensures that the communication link from the control panel

to the central monitoring station is always intact and if there is a break in

communication an alarm is triggered immediately to cause an alarm.

When you are connected to a Monitoring Service you are able to get them to

send commands and send you a status report of your Alarm System whenever

you ask. For example, arm or disarm your Alarm System using the Internet

connection.

RUNNER is accessible worldwide with RUNNER link interface via Internet

Network from any PC workstation for programming and control the RUNNER

panel.

System Overview

Com Port or

Secure Database

(Remote)

Interne

Remote Work Station

Monitoring Service

Provide

Customer

Premise

Operator Monitoring Stations

Receiver

Firewall

Com Port or

TCP: 4750

TCP : 4700

LAN

1 2 3 4 5 6 7 8 9 ... 30 31

Keine Kommentare

Crow Runner Link Bedienungsanleitung Seite 4