Crow Runner Link Bedienungsanleitung PDF herunterladen (Seite 13)

RUNNER LINK Gateway Configuring the Runner Link

7. Select Use the following IP address radio button.

8. Enter an IP address of 192.168.0.5.

9. On the PC keyboard, press the [Tab] key, or click the Subnet Mask field

(underneath the IP address).

A value of 255.255.255.0 is inserted automatically.

10. Click the

button twice and close the open screens.

Changing to the Authorized PC IP Address

This section requires that you have already installed the Configuration software.

See

Installing the Installer Configuration Software on page 5.

The Authorized Address is the name given to the IP address of your computer

that you use for configuring the alarm systems. It is a static address of your

choosing and makes maintaining the equipment you have installed much easier.

1. Ensure that the PC you are using to change the IP address has been set to

192.168.0.5 and a Subnet Mask of 255.255.255.0.

2. Double-click the Configurator

icon.

The Pconfig screen opens.

NOTE

For security concerns the screen and CONFIG button are disabled after

approximately 45 seconds. To continue, close the screen and open the

program again.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 28 29

Keine Kommentare

Crow Runner Link Bedienungsanleitung Seite 13